|  Tool Description:
Woodworking profile blade 50 x 45 x 3 mm carbide blank
Tool Application:
Blade profile with undercut Tool Material:
Carbide Grinding Setup:
Machine: WGX
Coolant Medium: oil
Grinding Operations:
1. Define blade geometry
2. Blank definition
3. Define workholding
4. Break the geometry into segments
5. Slice roughing
6. Rough profiling parameters
7. Finish profiling parameters
8. Control wheel pivot
9. 2D grinding Animation Special Requirements:
Blade chuck Cycle Time (estimate):
4 minutes 17 seconds Other Comments:
Woodworking blade ground at the 3 o'clock position with the capability to control the pivot point which allows unrestricted access to the undercut section. |